CornerStone
Please choose a shape below for detailed dimensions, packaging information and stocking colors.
Shape / Color Collections:
 |
50 Series Units - F-50 Unit
Dimensions: 4" x 12" x 18" (102 x 305 x 457 mm)
Coverage: 2 pc / ft2 (21.53 pcs / m2)
The 50 Series Units are suitable for gravity walls up to 3' tall. These half-height units can be used alone or as a creative design detail when building walls with 100 or 200 Series units.
|
 |
50 Series Units - F-50 Cap
Dimensions: 4" x 12" x 18" (102 x 305 x 457 mm)
Coverage: 1.5 lineal ft. / pc. (0.457 lineal m. / pc.)
Also available in straight-sided units.
|
 |
50 Series Units - R-50 Unit
Dimensions: 4" x 12" x 18" (102 x 305 x 457 mm)
Coverage: 2 pc / ft2 (21.53 pcs / m2)
|
 |
50 Series Units - R-50 Cap
Dimensions: 4" x 12" x 18" (102 x 305 x 457 mm)
Coverage: 1.5 lineal ft. / pc. (0.457 lineal m. / pc.)
Also available in straight-sided units.
|
 |
100 Series Units - F-100 Unit
Dimensions: 8" x 12" x 18" (203 x 305 x 457 mm)
Coverage: 1 pc / ft2 (10.76 pcs / m2)
The 100 Series Units are suitable for gravity walls up to 4' tall. When reinforced with geogrid, 100 Series walls has excellent stability and is ideal for tall structural walls.
|
 |
100 Series Caps - F-100 Cap
Dimensions: 8" x 12" x 18" (203 x 305 x 457 mm)
Coverage: 1.5 lineal ft. / pc. (0.457 lineal m. / pc.)
Also available in straight-sided units.
|
 |
100 Series Units - R-100 Unit
Dimensions: 8" x 12" x 18" (203 x 305 x 457 mm)
Coverage: 1 pc / ft2 (10.76 pcs / m2)
|
 |
100 Series Caps - R-100 Cap
Dimensions: 8" x 12" x 18" (203 x 305 x 457 mm)
Coverage: 1.5 lineal ft. / pc. (0.457 lineal m. / pc.)
Also available in straight-sided units.
|
 |
200 Series Units - F-200 Unit
Dimensions: 8" x 22" x 18" (203 x 559 x 457 mm)
Coverage: 1 pc / ft2 (10.76 pcs / m2)
The CornerStone 200 Series units are used for critical retaining wall sites, such as highways, water sensitive areas (rivers, lakes or ocean shores) and very tall or high-loaded stressed projects.
The 200 Series Units are suitable for gravity walls up to 6' tall - for walls over 4', consult an engineer and the local building code. The 200 Series units should be used where structural stability is important, such as a site that has a negative slope avoce the top of the wall. The 200 Series Units can also be used as a base course for a 100 Series wall to provide added base stability.
|
 |
200 Series Units - R-200 Unit
Dimensions: 8" x 22" x 18" (203 x 559 x 457 mm)
Coverage: 1 pc / ft2 (10.76 pcs / m2)
|
 |
Corner Unit
The Corner Unit saves time when building an outside 90° corner. The running bond pattern is maintained when using the corner units. The two-sided textured unit can also be used to build pillars, finish top-of-the-wall steps or outside corners of stairs. The overlapping corner units can be secured using a high strength concrete adhesive. The Corner Unit is available in Flat Face only, but is suitable for use with both flat and radius face walls.
|
Colors:
 |
Gray |
 |
Khaki |
Color photographs show the general appearance of color and texture ranges. However, due to the limitations of photography and the internet, final color and product selection should be made from actual samples. The actual product shipped is not guaranteed to match the photograph.
